Application
Groove
  + -
inner diameter (mm)
outer diameter (mm)
depth (mm)
groove width (mm)
bore diameter (mm)
groove diameter (mm)
piston diameter (mm)
rod diameter (mm)
O-Ring
±
inner diameter (mm)
Search for and load them also into your created design.
cross section diameter (mm)
Results
Results at Installation min. nom. max.
O-Ring Compression (%)
Free Groove Volume (%)
O-Ring Inner Diameter Stretch (%)
O-Ring Outer Diameter Upsetting (%)
 
Results at Service min. nom. max.
O-Ring Compression (%)
Free Groove Volume (%)
O-Ring Inner Diameter Stretch (%)
O-Ring Outer Diameter Upsetting (%)
 
Results at Installation min. nom. max.
O-Ring Compression (%)
Free Groove Volume (%)
O-Ring Inner Diameter Stretch (%)
O-Ring Outer Diameter Upsetting (%)
 
Results at Service min. nom. max.
O-Ring Compression (%)
Free Groove Volume (%)
O-Ring Inner Diameter Stretch (%)
O-Ring Outer Diameter Upsetting (%)
 
Results at Installation min. nom. max.
Calculated Values at Centrical Position of Piston:
O-Ring Compression (%)
Free Groove Volume (%)
O-Ring Inner Diameter Stretch (%)
 
Results at Service min. nom. max.
Calculated Values at Centrical Position of Piston:
O-Ring Compression (%)
Free Groove Volume (%)
O-Ring Inner Diameter Stretch (%)
Groove Depth incl. Gap (mm)
Sealing Gap (mm)
Calculated Values at Excentrical Position of Piston:
O-Ring Compression (%)
Groove Depth incl. Gap (mm)
Sealing Gap (mm)
Results at Installation min. nom. max.
Calculated Values at Centrical Position of Rod:
O-Ring Compression (%)
Free Groove Volume (%)
O-Ring Inner Diameter Stretch (%)
 
Results at Service min. nom. max.
Calculated Values at Centrical Position of Rod:
O-Ring Compression (%)
Free Groove Volume (%)
O-Ring Inner Diameter Stretch (%)
Groove Depth incl. Gap (mm)
Sealing Gap (mm)
Calculated Values at Excentrical Position of Rod:
O-Ring Compression (%)
Groove Depth incl. Gap (mm)
Sealing Gap (mm)

With an ERIKS account you can save, open or delete your designs.

Printing your design should be done using the [Generate printable document] button

One moment please...