TFE/P is a copolymer of tetrafluoroethylene and propylene with a fluorine content of app. 54%. This material is unique due to its resistance to petroleum products, steam, and phosphate-esters. In some respects it exhibits media compatibility properties similar to ethylene propylene and fluorocarbon. The compression set resistance at high temperatures is inferior to standard fluorocarbons. Service temperatures are -5°C (25°F) to +204°C (+400°F).
Aflas®, TFE/P applications
TFE/P provides improved chemical resistance to a wide spectrum of automotive fluids and additives. It is resistant to motor oils of all types, engine coolants with high level of rust inhibitors, extreme pressure (EP) gear lubricants, transmission and power steering fluids, and all types of brake fluids including DOT 3, mineral oil, and silicone oil. TFE/P is ideal for heat transfer media, amines, acids and bases, as well as hot water and steam up to +170°C (+340°F).
Datasheets Aflas®, TFE/P
The table below shows the available datasheets for this material in pdf. Safety datasheets are available here.
More information about Aflas®, TFE/P at ERIKS
For more information about TFE/P you can fill in the form below or contact the nearest ERIKS Sealing & Polymer location.
|Compound number||Material||Nominal hardness||Compliances||Application||Colour||Minimum temperature||Maximum temperature||Datasheet|
|223002||TFE/P - FEPM||ADI,REACH,RoHS||Chemical Processing | General purpose||Black||-10.0||200.0|